With our rich industry experience in this domain, we are actively engaged in offering Industrial Metal Wave Tile Profile Sheets. The offered sheets are widely used for covering warehouses and others open sheds. Our Industrial Metal Wave Tile Profile Sheets are checked on different parameters in order to maintain their flawlessness at users’ end. These sheets are resistant to heat & have superb finish.
- Maximum pitch 200 mm.
- Minimum crest 33 mm.
- Depth with cover width of 1000 mm.
- Using 0.3-0.6 mm colour coated steel as per IS – 14246.
- Zinc coating of 120 Gsm/m2.
- Top organic coating of polyester paint 16-18 microns.
- Over 5-7 microns epoxy primer.
- Back coat of 7-10 microns epoxy paint.
- Sheet to be longer in required length up to 13 meters.
- Fixed using self drilling and self tapping screws of size 12 x 14 x 25 mm.
- Sealed with integrated EPDM rubber washer for water tight fixing.
- Side laps to be stitched using Aluminium pop rivets.